Gary Snyder Fabrication

We are closed. Gary Snyder Fabrication is temporarily closed to the public. Effective until further notice.

Gary Snyder Fabrication is an owner operated metal fabrication shop providing personalized service with unparalleled attention to detail.

Email or call today to schedule an appointment to discuss your project.

Stainless Steel "Castle" Door Hinges

We made these very stout hinges for our friends at Williams Gate Works for a pair of giant garage doors they were commissioned to build. We quickly started calling them castle doors because of their shape and size. We made these hinges out of 304 stainless steel with a black patina and protective clear coat. The black patina gives the hinges the understated look of black steel or iron but with the rust resistance and additional stregth of stainless steel. 

Some of the black patinaed stainless hardware, all of the latches ride on custom black Delrin bushings.

Some of the black patinaed stainless hardware, all of the latches ride on custom black Delrin bushings.

Close up of the black patina on one of the hinges, the 1/2" x 3" stainless steel bar on the right was set into the wood doors and is not visible once the doors are installed.

Close up of the black patina on one of the hinges, the 1/2" x 3" stainless steel bar on the right was set into the wood doors and is not visible once the doors are installed.

The doors from inside the garage, Shannon at Williams Gate Works really knows how to make beautiful doors. The hinges pivot off center to allow the doors to open completely flat against the interior walls.

The doors from inside the garage, Shannon at Williams Gate Works really knows how to make beautiful doors. The hinges pivot off center to allow the doors to open completely flat against the interior walls.

Here's the exterior of the Cedar doors with Shannon Williams standing in front of them to give a sense of just how large these doors are.

Here's the exterior of the Cedar doors with Shannon Williams standing in front of them to give a sense of just how large these doors are.

proudly Built in Santa Cruz

This website and all content on it are Copyright © Gary Snyder Fabrication 2010-2019.

All rights reserved. No site content may be copied without express written consent.